Ooops, sorry the page you requested does not exist.

Please visit our home page.

               
Are you looking for:
Rtx-VMS Cap. Column 30m, 0.25mm ID, 1.40um Rtx-VMS Columns Material: (fused silica) Phase Information: proprietary Crossbond phase • Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260. • Complete separation of U.S. EPA Method 8260 compounds in less than 10 minutes. • Stable to 260 °C. • No known equivalent phases. Rtx-VMS columns offer lower bleed, better selectivity, and overall faster analysis for separating volatile organic compounds, such as those listed in U.S. EPA Method 8260B. The Rtx-VMS stationary phase is a highly stable polymer that provides outstanding analysis of volatile compounds, in combination with sensitive ion traps and Agilent 5973 mass spectrometers. 0.18 and 0.25 mm ID columns allow sample splitting at the injection port, eliminating the added expense and maintenance of a jet separator. A 0.45 mm or 0.53 mm ID column can be directly connected to the purge-and-trap transfer line in a system equipped with a jet separator. DF: 1.40 µm ID: 0.25 mm Length: 30 m Product Name: Rtx-VMS Product Type: GC Column Similar to: Agilent 122-1534 Temp Limits: -40 to 240/260 °C Units: ea.
Column, LC, Shim-pack GIS C18, 3um, 1.0x75 The GIS C18 column has a high surface area for strong hydrophobic interaction, increased retention, and low adsorption of ionic compounds. Highly uniform particles ensure stable mobile phase delivery and symmetrical peak shapes. Ideal for scaleup to preparative column sizes. USP L1, pore size: 100A, surface area: 450 m2/g, 15% carbon load, pH range: 2 to 7.5, fully endcapped. A guard column is recommended to prolong the lifetime of the analytical column.
Column, LC, Shim-pack GIS C18, 3um, 1.0x50 The GIS C18 column has a high surface area for strong hydrophobic interaction, increased retention, and low adsorption of ionic compounds. Highly uniform particles ensure stable mobile phase delivery and symmetrical peak shapes. Ideal for scaleup to preparative column sizes. USP L1, pore size: 100A, surface area: 450 m2/g, 15% carbon load, pH range: 2 to 7.5, fully endcapped. A guard column is recommended to prolong the lifetime of the analytical column.
Ferrule, SS 1/16" SS Valco Ferrule 10 Pack Nuts & Ferrules Material: (1/16-Inch Stainless Steel) Phase Information: for Valco Connectors Restek offers a selected line of Valco fittings for connecting fused silica or 1/16- or 1/8-inch metal tubing. Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. If you don’t see the Valco fitting you need, please request special ordering information. Valco Connectors Valco fittings have been designed for the specific demands of instrumentation and manufactured with the tight tolerances and premium quality that analysts require. If you don’t see the Valco fitting you need, please request special ordering information. Material: Stainless Steel Product Name: Ferrules Product Type: Fitting/Connector Size: 1/16" Units: 10-pk. Vendor: Valco Vendor Cat#: ZF1-10
Syringe 10ml Gas Tight Syringe w/Luer Lock PTFE Tip, Gas-Tight Syringes Material: Hamilton • Suitable for gases or liquids. • High accuracy of dispensed volumes. • Interchangeable barrels, plungers, and tips extend performance and increase cost-effectiveness. *Needles sold separately. PTFE Tip, Gas-Tight Syringes • Suitable for gases or liquids. • High accuracy of dispensed volumes. • Interchangeable barrels, plungers, and tips extend performance and increase cost-effectiveness. Needle Gauge: * Needle Point Style: w/o slots Needle Termination: TLL Product Name: PTFE Tip, Gas-Tight Syringe Product Type: Syringe Units: ea. Vendor: Hamilton Vendor Cat#: 81620 Vendor Model: 1010 Volume: 10 mL